You just had your new sprinkler system installed in the garden to make your lawn look all the more beautiful and bam, your first water run, and the pressure is way too low! What can you do about this situation? Low pressure can lead to serious issues in your green area, such as browning, improper water disposal, drying, and so much more. Whenever you install a lawn sprinkler, Austin, TX, make sure you check for the water pressure before the technicians leave to ensure everything is top-range.
In case the pressure lowers after a few days or weeks of installation, it can evidently cut down your overall irrigation range. Not just that, it can also cause your sprinkler heads to fail from popping up when needed.
Common Culprits of Low Water Pressure in Your Sprinkler System
Here are the common issues that lead to lowered water pressure:
- The valves located on your preventer device for backflow isn’t completely open.
- There is a break or leak in your sprinkler or water line.
- Your sprinkler heads have accumulated dirt or have clogged.
- The main water or shut-off valve isn’t completely open.
- There is a water line obstruction.
- There is an enhanced demand for water supply from the local municipality.
Now that you know the basic issues that might lead to a decrease in the water pressure let us take an in-depth look into these problems and the ways you can correct it with the help of a professional service provider for lawn sprinkler, Austin, TX.
Low Water Pressure: How to Correct it for a Beautiful Garden?
1-Backflow Prevented Correction:
If the water pressure within the entirety of your sprinkler system hasn’t been receiving optimum pressure while the same inside your residence is fine, it is time to get professional help from technicians for lawn sprinkler, Austin, TX. This issue points out the fact that your valves for backflow prevention aren’t open completely. Valves that open all the way allow for the accumulation of maximum pressure throughout the sprinkler system.
A classic device for backflow prevention comes with two pipes, which includes a vertical one and a horizontal one. Almost all of these backflow preventers come with valves added to both these pipes. When these valves are kept open, the handles tend to be parallel with the pipe. In case you want to adjust these valves, all you need to do is turn your valve present inside its horizontal pipe, followed by the vertical one.
2-Main Valve/Shut-Off Valve:
If the sprinkler system is connected to the shut-off valve with a connection to the water supply at home, make sure you check and ensure the connection is completely open.
In case you recently shut off your prime water supply, it is important that you check if the valve is completely open. The sprinkler systems require way more flow as compared to the sink or the shower. You might not notice that your valve was actually left closed off partially.
On the other hand, if you happen to have water supply from the local municipality, consider factors like any recent pipe or road work that might have happened in the neighborhood fairly recently. Call in your water supply company or even talk to your lawn sprinkler, Austin, TX, installation service providers. It could happen that the supply was shut down temporarily, and the workers assigned to the job simply forget to get things back on again. Or it might so happen that the valve failed to open fully.
3-Leak/Break in Your Water Line:
Did you recently dig up your yard? Did you happen to place a trellis, garden stake, fence post, tether for dog leash, or any sharp object close to the sprinkler line? In case this is something you have done, your water line might have broken & needs to be immediately repaired. Plus, the lines might also develop certain leaks that worsen with time.
If you feel this is the case, you can always seek help from reliable service providers for lawn sprinkler, Austin, TX, repair, or replacement services. In order to check whether the issue is leakage or breakage, start looking for depressions or abnormally wet locations within the lawn. Whenever you start your sprinkler, you will notice bubbling up of water from the site of leakage.
Not just that, also take a look at the sprinkler head series that haven’t been working perfectly. The water-line issue can be located somewhere between the last completely functional head going all the way to the very first non-working sprinkler head.
4-Water Line Obstruction:
In case you can find time to isolate the area with the issue but fail to notice the evident signs of leakage, it is possible that the line might be obstructed. Consider a few questions in your mind before opting for services for repair or replacement for lawn sprinkler, Austin, TX.
Is there any large shrub or tree in the problem area? If this is the case, roots might wrap around your water line & squeeze the same over time. Are there vehicles parked in the area, or do you frequently drive through? This could have caused the weight to compress or crush the waterline.
To correct this, you have to replace your damaged pipeline & restore the pressure. If your tree roots have been causing this damage, you can easily reroute your water line through a different setup. Over time, there is also a chance for small cracks to develop within the waterline, which allows the dirt to seep in.
During maintenance or repairs, you might also see dirt seeping into your water line. It doesn’t take a huge amount of dirt to clog your water flow. To get rid of this issue, you need to flush your sprinkler heads in the affected area. In case the damage is major, you should consider a quick repair of the cracked sections with the help of repair professionals for lawn sprinkler, Austin, TX.
5-Clogged or Dirty Sprinkler Head:
If the overall pressure coming from your sprinkler head shows that only one or two has low pressure, it could simply be a case of dirty nozzles. To correct this, you need to examine your filter as well as the problematic sprinkler head. In case you could spot the dirt, clean it properly. Apart from this, grass taking over the area can also lead to sprinkler heads failing to pop out perfectly.
In order to deal with this issue, you need to trim your lawn regularly, at least in areas that happen to have the sprinklers.
6-Local Water Supply Issue:
Before you go ahead and assume all the possible issues about your sprinkler system, make sure you check once with your neighbor. Ask them whether they have been experiencing a low water inflow in their sprinkler system as well. Not just that, also check whether the area has been unusually dry and hot.
Also, check whether the pressure in your sprinkler system drops down during peak watering hours. In case the flow is better at different points of the entire day, it surely has something to do with your local municipality. Are there any new businesses or homes in the locale? It could be drawing off the water supply in your area, leading to low pressure.
The heightened demand for water could lead to lower pressure for the sprinkler flow. If this is the case, it is better to contact your municipality to confirm the same. Also, ask whether this is a temporary issue or something that needs to be dealt with. Accordingly, your municipality can help recommend a non-peak time frame to help you water the lawn with a higher pressure.
In case this pressure issue is permanent, you might want to reconfigure the existing sprinkler system with the help of professionals for lawn sprinkler, Austin, TX, installation. Get sprinkler heads that are adapted to the low water pressure in your area.
Conclusion
When talking about low pressure on your sprinkler heads, the long-term issue can lead to significant damage to the lawn. Plus, you might not always have the time to dedicate to each plant in your lawn with regards to watering. This is the prime reason you got a sprinkler system installed in the first place. So, why keep things left out for long? Get an experienced professional to deal with the problem for your lawn sprinkler, Austin, TX.
Looking for the best and most reliable professionals for lawn sprinkler installation, repair, replacement, or maintenance? At Hunter Sprinkler Services, we offer full landscaping services, irrigation installation, and patio services as well. To get more information on our services, give us a quick call at 512-690-3113 or mail us at aubreyhunter@aol.com.