Keeping the lawns and landscape well hydrated is very important. The natural ground water or rain water do provide efficient watering, but sometime irrigation systems are essential to meet the requirements efficiently.
When it comes to the best irrigation systems, the sprinkler system is one of the best irrigation systems in the world. Its efficient, cost-effective and ensures your landscape is well irrigated throughout the year. Sprinkler irrigation installation in Austin TX homes are very common. They are easy to work with and they ensure efficient watering on the entire landscape.
Just like any other equipment, machine and tools, the sprinkler system too is likely to develop problem at some point of time. This can happen due to a variety of reasons, and there are ways to tackle them easily. If you have sprinkler system installed in your property, you may see a few issues arising from time to time. If the problems are minor, you can easily fix them or call professional repair service to address the issue.
Here are some of the most common sprinkler problems and how to deal with them:
1-Increased in Cost
If your water bill is higher than expected then your sprinkler system is not working efficiently. The irrigation installation in Austin TX homes is supposed to reduce the water usage by 50%. If the bill is high, which means your irrigation system is using more water rather than working efficiently. This is a big warning sign that says that you need to check your irrigation system. If you cannot find the fault, call sprinkler technicians to have a look at it. The reason for sudden spike in the cost can happen due to leaks in the system. If the water is escaping the pipe while watering the landscape, more water will be used.
How to fix the leak:
Usually, the sprinkler system works with the underground irrigation pipes. If there is a leak, a professional will find the leaky pipes by digging up the yard. Normally, you can tell where the leak is as there will be puddle of water on the area. The leaky pipe will be replaced with a new one. If the leak is minor then it can be fixed without any replacement. In some cases, an entire section of the pipe may need repair work. At the same time, the technicians will also check the sprinkle head to see if they are leaking too.
2-Issues with the Valves
Fault valves of the sprinkler system can result in inefficient watering in the area. Broken system control valves can result in uneven water distribution, which means more water will be used. Apart from inefficient watering, the water bill be high too. One easy way to check if the system is working fine or not is to see the grass. If certain areas are drier than the rest of the lawn it means the sprinkler is not working efficiently and the valve can be the reason behind it. Look for signs like water pooling, water dripping near the filters, appearance of bubbles, dirt, or mold growth around the equipment.
How to fix the problem of valve:
Replacing the fault valve is one of the best was to address the problem. Breaking of the sprinkler heads is common. It happens when it has been in use for a long time. All you have to do is looking for any cracking signs on the valves. You can easily see the signs. Sometimes the valve will come off completely. If the head is mounted too high, vehicles or lawnmowers can easily damage them.
Replace the valve of the sprinkler. It is easy enough, but if you want things to be right or you don’t have the experience, just call the professionals. They will easily replace the vale and make the sprinkler system efficient once again.
It is important to get irrigation installation in Austin TX by an experienced installer. Wrong installation can be a big reason for inefficient sprinkler system.
3- The Problem of Clogged Sprinkler Heads
Clogged sprinklers are common too. When you look closely you will see that the sprinkler heads are clogged making the irrigation system inefficient. When they are clogged, they will not spray waters, or will not rise-up when it is needed and may spray unsteadily.
Clogging can happen due to the presence of dirt, or grime or something in the water. To check if the sprinkler is really clogged, you need to dig up the head and take it apart by lifting the canister, the filter present in it is responsible for filtering out debris, grass or dirt.
How to fix the issue:
You can easily unclog the head by rinsing it with clean water. And, once the head and filter screen are cleaned, put them back. Make sure to check the head for any clogging from time to time. If the head is clogged it will not irrigate properly. At the same time, make sure that the irrigation installation in Austin TX is done by a professional and it is done correctly. Wrong installation of irrigation system can create a huge problem later on.
Make sure to get regular check-ups of the sprinkler system so that they can work efficiently and remain in good condition. This will also save you a lot of time and money on expensive repairs.
4- Water Pressure Issue
If your sprinkler system water pressure isn’t good enough, your lawns will not get proper irrigation. It is important to check the water pressure from time to time to ensure that the are working efficiently. Without the proper pressure your irrigation system will not take the water to the plant. The grass will not get sufficient water to grow and thrive. If the lawn is not well irrigated, it will look dry and brown. This is the sign that tells that your sprinkler system needs repairing or checking.
How to fix the issue:
You can use the tools like pressure gauge, and other techniques to check the system’s pressure. Make sure to check the pressure when the system is both on and off.
There are different ways you can do it – static pressure check when the system is at rest, when the pressure is at the lowest, and when the system is scheduled to irrigate the lawn. If you find it difficult, you can always seek the help of the professionals. They will perform the test and provide you with the results. They will also fix the problem so that your sprinkler system runs efficiently once again.
The Bottomline
The sprinkler system is one of the best irrigation systems you can install at your home. It is efficient and saves a lot of time. It is common to see a few problems in the system. Some of them are easy to fix while others may need professional help. Make sure to get professional irrigation installation in Austin TX for the best results.
If you are looking for a reliable irrigation installation in Austin TX, the Hunter Irrigation Services provides the best solution. We have many years of experience and have an experienced team that can handle all your needs efficiently. Call us at – 512-690-3113.
Read previous blog: Stuck at home during lockdown? Review your irrigation system right away!