Irrigation is considered the keystone of agriculture. Without it, the greens we see all around us would be nothing but arid land. However, water being one among the precious elements that keep us alive, should be conserved and used in the right way. To ensure that everything is in line with the safety of nature as well as suits our needs and requirements, we need to decode the difference between the commonly used variants of irrigation.

Now, there are various types of irrigation processes, but here we are going to discuss and compare sprinkler irrigation and flood irrigation.

Before comparing, we must know how these two irrigation system function if you have plans for irrigation installation, Austin, TX.

Sprinkler Irrigation vs. Flood Irrigation: The Comparative Rundown

With sprinkler irrigation, water is supplied through a pipe system by pumping and then sprayed to the entire field, which looks like natural rainfall. Whereas flood irrigation is a very simple method in which water is delivered by pipes, ditch, or some other means, and the water simply flows over the field through the crops.

The technology of sprinkler irrigation was tabled in the realm about a century ago, but its use increased to bigger areas forthe past eighty years only. A lot of areas in the world faced salinity issues due to uncontrolled and unplanned surface irrigation systems.

However, after World War 2, due to the evolution of plastics, modernization of pipes of light aluminum, efficient electric motor, and pumps, phenomenal development in irrigation took place bringing into the scenario, thesprinkler system.

Nowadays, irrigation in valleys or lawns/gardens has been switched from flood irrigation to sprinkler irrigation. Now you might be wondering why people make an effort to switch their irrigation methodology to a better one.

Changing over from flood irrigation to sprinkler irrigation has helped in various ways, which include saving more water, energy, and effort. And here are some more reasons why you need services for irrigation installation, Austin, TX.

1. Irrigation Efficiency:

Perhaps the ultimate benefit to a lawn owner for converting irrigation systems is the increase in entire irrigation efficiency. This term actually defines the ratio between the total volumes of water profitably used by the crops to the total volume of water supplied to the crops.

Irrigation efficiency in flood irrigation is very less in comparison to sprinkler irrigation, although it can fluctuate depending on geological and climatic factors. The irrigation efficiency of flood irrigation is around 45% to 60%, whereas sprinkler irrigation has around 65% to 80% efficiency.

It’s also been proven that by changing from flood irrigation to sprinkler irrigation, there has been an approximately 50% to 70% increase in the average irrigation efficiency. So, hiring service providers for irrigation installation, Austin, TX, would most definitely be a great idea.

2. Water Logging Effect: 

Waterlogging is a major issue associated with irrigation. It can stop the further growth of plants and delay it until the excess water drains or dries up from the root surface.

But with sprinkler irrigation, waterlogging is not an issue; however, you will face this problem with flood irrigation. Waterlogging causes the water to proceed below the root zone, which results in the rise of water tables. In places having saline soils, these increasing water tables can bring salt up into the root zone, which leads to irrigation salinity trouble.

Water is distributed uniformly when you use a sprinkler. This helps to provide a sufficient amount of water to the plants without any waterlog. In this way, you can prevent excessive loss of water, which seems to occur in flood irrigation.

3. Land Factor: 

In sprinkler irrigation, leveling of land is not required, unlike flood irrigation, which can be expensive. Additionally, for the establishment of your sprinkler irrigation, use of wide areas is also not necessary.

Grading of the land is required in flood irrigation for uniform distribution of water. But if you are using sprinkler irrigation, then it can be avoided as the sprinkler distributes water evenly.

With sprinkler irrigation, leaching of the nutrients in the soil is not an issue, whereas, in flood irrigation, excessive leaching can happen even under perfect water movement. Leaching of nutrients in soil requires extra fertilization, which eventually increases the cost for labor, fuel, fertilizers, and equipment.

The most important plus point of using sprinkler irrigation over flood irrigation is that the sprinkler irrigation system is appropriate for establishment in any type of soil. This is because the sprinkler system provides a uniform and ideal amount of water depending upon the crop and soil type.

4. Labor-Reduction: 

Another important aspect to take into consideration while choosing sprinkler irrigation installation, Austin, TX, over flood irrigation is the reduced implementation of manual labor. Sprinkler systems can offer many economic and environmental benefits over flood systems as well.

Sprinkler irrigation has shown significant savings on labor as compared to flood irrigation. Current analysis shows labor costs can be diminished approximately by 90% with new techs that include modern automation gear.

Flood irrigation needs extra labor involvement and regular care as aspirators must routinely move mud dams all along the day to assure sufficient water cover and prevent ponding.

If mud-dam movement at proper intervals is not done, then the excess water can cause erosion and leaching, which leads to topsoil and nutrients loss.

In sprinkler irrigation, no water dam movement is required as the sprinklers distribute water uniformly. This is how the labor cost and effort is cut to more than half by using sprinklers.

5. Effect on economy and time: 

Sprinkler irrigation systems can economize producers’ money and time, as most sprinkler irrigation systems need relocation only every twelve hours. In addition to that, sprinklers provide more consistent and uniform water cover and ensure minimal soil erosion and nutrient loss, which saves both input and labor.

Chemigation and fertigation in sprinkler irrigation can be done for pest control or plant nutrition by infusing chemicals into the water of irrigation, saving a lot of time as well as labor. In the case of flood irrigation, chemigation and fertigation are needed to be done by the rancher or lawn owner, which increases labor.

At specified time or angles, the core pivot system of the sprinkler can be hardwired to fire up and stop. This is important, which helps the sprinkler in uniform distribution of water as well as saves a lot of time. In this way, the extent of water supplied can be controlled, which results in saving water.

6. Eco-friendliness:

A sprinkler irrigation system can also be used for the purpose of cooling during high heat. There are plentiful other purposes for sprinkler irrigation, which include cooling poultry environments and livestock, protection from farm fire, prevent settling of dust, and log curing.

Apart from that, the sprinklers can be accordingly modified by adding more transversal routes and sprinklers at prearranged spacing so that the complete field can be covered with a fine drizzle of water during the post rainy season days when the temperature is much cooler. In this way, crops can be protected from frost.

Conclusion

As the years pass by, the anxiety and concern for going green has elevated all over the world, which has lead to the advancement of technology for irrigation. And among these great advancements, sprinkler irrigation is also one. Well, of course, sprinkler irrigation is a mind-blowing technology that eases farming and also boosts your home garden harvest while keeping your lawn green and fresh without wasting water.

If you are an agricultural produceror lawn owner and still using a flood irrigation system, then now is the perfect time to switch your irrigation method to sprinkler irrigation. Hunter Sprinkler Services provides you with a perfect opportunity to switch and improve your irrigation system by using a sprinkler system. Hunter Sprinkler Services uses only the top quality Rainbird and HunterBrand Irrigation Products. So, no time wasting your precious time questioning and thinking. Upgrade your irrigation system today by calling us at 512-690-3113 for quick information on a free estimate. You can also mail us at aubreyhunter@aol.com.

All of us perceive that all the growing plants happen during the summer, and they eventually begin to die during the fall. Most of the people stop irrigating their lawn when autumn arrives. Just because the plants desperately need water during the summer as compared to any other season, doesn’t mean one should put a stop to irrigating during other seasons. The concept is little more complicated and a proper research is required to understand it completely.

In addition to mowing grasses at the correct height and removal of fallen leaves in time, adequate watering is also critical during fall. So, the irrigation installation, Austin, tx won’t go in vain in the autumn season. Here we are, breaking the globally-popular misconception with facts. Read on and educate yourself on this context.

When should you stop watering?

Keep irrigation your lawn until you see the ground freezing. When that happens, you should know that the time has come to a stop with all the watering. The frozen ground creates a barrier between the plant’s root and the path of water. There’s no use of watering when it cannot reach the roots. This is the reason it is said that northern winters create desert conditions in cold temperatures.

By “desert,” you might vision board images of succulents and cacti standing over hot sands. However, the desert is also used to refer to areas having frozen grounds. Plants enter into a stage called dormancy, where the need for water is next to nil.

How do plants function during the fall? Should you keep watering or not?

Not all plants are the same. Different plants require different things. It is during the fall when perennials and shrubs start expanding their roots. While summer is for flower and leaf growth, and seed and fruit production, the autumn season is dedicated to taking care of the root system. What makes the fall suitable for root growth is the fact that the soil becomes warm from the hot and sunny days of summer.

And then, the autumn season gives the warm days cooled nights along with regular rainfall that encourages the plant growth into the soil. The absence of rain will cause dehydration of plants. This is where the irrigation installation, Austin, tx comes into play. Watering the lawn every week or two helps the roots to grow. If you find a warm temperature and windy weather, you should keep irrigating. The wind might end up drying the plants and prevent the juices from flowing downwards.

For the transition that happens during the growing season to switch to the dormant season, plants work very hard. Plants send fluids down, which causes fall off of leaves. However, if there’s no rainfall, it will end up hampering the flow down of juices and leads to the desiccating of leaves. Therefore, root systems need good hydration to deal with cold temperatures, drying sun rays of winter, and high winds. While south-facing plants require more water, all the north-facing ones have a good water-holding capacity. In this way, you can pick out plants that need your help.

Newly planted plants need more water, along with plants and transplants that are subjected to attention. For example, evergreens, don’t take a break from the weather damage. All-year-round, their foliage is exposed to harsh conditions of sun, wind, and dry situations. Experts of irrigation installation, Austin, tx, will guide you through the current weather patterns and the amount of water the plants need.

Once the plants are deprived of water, a critical situation arises for them. Inadequate water supply doesn’t facilitate the uptake of nutrients during the growing period. For a good part of the fall, the grass keeps growing even when you might not be aware of it.

Strike a Balance

Now that you’re aware of how important it is to water your lawn during the fall, you should also not forget the fact that overwatering should be avoided at all costs. Areas getting sufficient rainfall don’t need much water. You only need to water overseeded areas or regions where new plants have been planted. When you overwater, your root system is harmed and provides an invitation to fungus for invading your lawn. Excessive moisture creates an environment in which fungal diseases thrive.

As compared to plants, grasses are more vulnerable when it comes to distributing fungal diseases. As you already know, lawns are filed up grasses. Once a grass picks up a fungus, it immediately transfers it to the neighbours. However, this is not always the case. Dry and warm spells usually occur throughout the fall in the southern areas. Contact the nearest irrigation installation, Austin, tx, and the experts will provide the best solution to you.

Conclusion

We hope this article was informative enough to break the widely-believed misconception of not watering the lawn during the fall. We don’t want you to make the mistake that people have been making since time immemorial. There’s so much more to the pattern of watering than this. It’s strongly recommended to water the plants in the early morning. In this way, the lawn has all day long to dry out completely before night falls. Similarly, the evening is considered as the worst time to irrigate the grounds. Embrace the amazing season, and help your plants while they are in the transitioning stage to the state of dormancy. Also, you can help the plants get ready for the onset of winter. Good watering, mulching, and trimming are some of the things you can do to get them ready. When the spring arrives, your plants are going to thank you for all the hard work done and will grow even better with colors that are better than summer.

If you are someone who just can’t stick to one place and traveling is your life, it doesn’t mean you’ve to come back to a dead lawn. Hunter sprinklers is here, providing you with the best irrigation installation, Austin, tx, so that you don’t have to compromise with the health of your little buds. Starting from emergency repairs and landscaping to sprinkler maintenance and installation, our experts strive to provide the best of everything. Our certified technicians will treat your lawn or landscape with the utmost care. Our company is insured, licenses, and fully bonded for installations of lawn sprinklers in Austin. All our products are of the highest quality so that you experience the best properties of irrigation installation. Your precious garden will be watered all-year-round. Our staff is very well-behaved and friendly to clients. If you have got further queries, contact us via mail at aubreyhunter@aol.com or call us at 512-690-3113.

Keeping the lawns and landscape well hydrated is very important. The natural ground water or rain water do provide efficient watering, but sometime irrigation systems are essential to meet the requirements efficiently.

When it comes to the best irrigation systems, the sprinkler system is one of the best irrigation systems in the world. Its efficient, cost-effective and ensures your landscape is well irrigated throughout the year. Sprinkler irrigation installation in Austin TX homes are very common. They are easy to work with and they ensure efficient watering on the entire landscape.

Just like any other equipment, machine and tools, the sprinkler system too is likely to develop problem at some point of time. This can happen due to a variety of reasons, and there are ways to tackle them easily. If you have sprinkler system installed in your property, you may see a few issues arising from time to time. If the problems are minor, you can easily fix them or call professional repair service to address the issue.

Here are some of the most common sprinkler problems and how to deal with them:

1-Increased in Cost

If your water bill is higher than expected then your sprinkler system is not working efficiently. The irrigation installation in Austin TX homes is supposed to reduce the water usage by 50%. If the bill is high, which means your irrigation system is using more water rather than working efficiently. This is a big warning sign that says that you need to check your irrigation system. If you cannot find the fault, call sprinkler technicians to have a look at it. The reason for sudden spike in the cost can happen due to leaks in the system. If the water is escaping the pipe while watering the landscape, more water will be used.

How to fix the leak:

Usually, the sprinkler system works with the underground irrigation pipes. If there is a leak, a professional will find the leaky pipes by digging up the yard. Normally, you can tell where the leak is as there will be puddle of water on the area. The leaky pipe will be replaced with a new one. If the leak is minor then it can be fixed without any replacement. In some cases, an entire section of the pipe may need repair work. At the same time, the technicians will also check the sprinkle head to see if they are leaking too.

2-Issues with the Valves

Fault valves of the sprinkler system can result in inefficient watering in the area. Broken system control valves can result in uneven water distribution, which means more water will be used. Apart from inefficient watering, the water bill be high too. One easy way to check if the system is working fine or not is to see the grass. If certain areas are drier than the rest of the lawn it means the sprinkler is not working efficiently and the valve can be the reason behind it. Look for signs like water pooling, water dripping near the filters, appearance of bubbles, dirt, or mold growth around the equipment.

How to fix the problem of valve:

Replacing the fault valve is one of the best was to address the problem. Breaking of the sprinkler heads is common. It happens when it has been in use for a long time. All you have to do is looking for any cracking signs on the valves. You can easily see the signs. Sometimes the valve will come off completely. If the head is mounted too high, vehicles or lawnmowers can easily damage them.

Replace the valve of the sprinkler. It is easy enough, but if you want things to be right or you don’t have the experience, just call the professionals. They will easily replace the vale and make the sprinkler system efficient once again.

It is important to get irrigation installation in Austin TX by an experienced installer. Wrong installation can be a big reason for inefficient sprinkler system.

3- The Problem of Clogged Sprinkler Heads

Clogged sprinklers are common too. When you look closely you will see that the sprinkler heads are clogged making the irrigation system inefficient. When they are clogged, they will not spray waters, or will not rise-up when it is needed and may spray unsteadily.

Clogging can happen due to the presence of dirt, or grime or something in the water. To check if the sprinkler is really clogged, you need to dig up the head and take it apart by lifting the canister, the filter present in it is responsible for filtering out debris, grass or dirt.

How to fix the issue:

You can easily unclog the head by rinsing it with clean water. And, once the head and filter screen are cleaned, put them back. Make sure to check the head for any clogging from time to time. If the head is clogged it will not irrigate properly. At the same time, make sure that the irrigation installation in Austin TX is done by a professional and it is done correctly. Wrong installation of irrigation system can create a huge problem later on.

Make sure to get regular check-ups of the sprinkler system so that they can work efficiently and remain in good condition. This will also save you a lot of time and money on expensive repairs.

4- Water Pressure Issue

If your sprinkler system water pressure isn’t good enough, your lawns will not get proper irrigation. It is important to check the water pressure from time to time to ensure that the are working efficiently. Without the proper pressure your irrigation system will not take the water to the plant. The grass will not get sufficient water to grow and thrive. If the lawn is not well irrigated, it will look dry and brown. This is the sign that tells that your sprinkler system needs repairing or checking.

How to fix the issue:

You can use the tools like pressure gauge, and other techniques to check the system’s pressure. Make sure to check the pressure when the system is both on and off.

There are different ways you can do it – static pressure check when the system is at rest, when the pressure is at the lowest, and when the system is scheduled to irrigate the lawn. If you find it difficult, you can always seek the help of the professionals. They will perform the test and provide you with the results. They will also fix the problem so that your sprinkler system runs efficiently once again.

The Bottomline

The sprinkler system is one of the best irrigation systems you can install at your home. It is efficient and saves a lot of time. It is common to see a few problems in the system. Some of them are easy to fix while others may need professional help. Make sure to get professional irrigation installation in Austin TX for the best results.

If you are looking for a reliable irrigation installation in Austin TX, the Hunter Irrigation Services provides the best solution. We have many years of experience and have an experienced team that can handle all your needs efficiently. Call us at – 512-690-3113.

Read previous blog: Stuck at home during lockdown? Review your irrigation system right away!

Due to the COVID-19 pandemic, not only cities but countries are locked down, and all of us are stuck at home. This is the perfect time to inspect your irrigation system and other parts of your garden to ensure that every system is working efficiently. In case they aren’t, you can call for professional maintenance, repair, or irrigation installation, Austin, TX, services. Although an automatic lawn irrigation system can make your garden look fresh and green, if it didn’t function efficiently, you might notice signs of dry patches or areas that are over-watered due to leakage issues.

While you have got enough time to stay at home, utilize these hours to give a new look to your lawn. Carry out a thorough inspection of the irrigation installation and get the issues resolved or get assistance from the professionals to get the water sprinkler system maintained.

Why is an irrigation system review critical?

There isn’t just one or two but several reasons for you to consider a quick review of the irrigation system being used in your garden. Water is critical for the great health of your plant. However, watering manually isn’t something you might want to do. Plus, it can be a major hassle. You might have to drag around the hoses, and in the process, you might even end up destroying a plant or two.

With innovative systems for irrigation installation, Austin, TX, you can be ensured that no manual effort is required to irrigate your space.

Here are a few reasons that make it important for you to review your irrigation system.

1-Higher Energy Bills:

If, in the past few months, you have experienced a sudden spike in your energy bills, it is critical for you to consider that might be a result of improperly installed irrigation systems or any leakage or malfunction that is leading to prolonged usage of power. We need to understand that outdated systems are prone to breakage and lead to higher power bills.

Plus, you cannot always be there to monitor things. So, now is the time to get started. With so much time at hand, you can try to track the issues that have been wreaking havoc to your irrigation system. In case you find something or even if you do not, it is important that you consider seeking help from professionals that provide services for irrigation repair or irrigation installation, Austin, TX.

2-Patchy Dryness in the Lawn:

In case your garden has been drying up in patches, you can be assured that something is wrong with the system. This dryness could be a reason for blocked or broken nozzles that have redirected or refrained the water flow from reaching certain areas. Rusted pipes or ones that have been used for far too long could be prone to such issues.

Check if this issue is prevalent in your case and opt for an immediate replacement for the part or, if needed, get an entirely new system installed with the help of service providers for irrigation installation, Austin, TX.

This can help avoid any issues in the future with regards to dryness in your beautiful garden.

3-Excessively Wet Garden:

To check whether your garden is normal or excessively wet, you need to put your finger on the soil. In case the soil feels way too soggy even after it being hours post irrigation, there surely is a breakage in your irrigation system. Now, you mind wonder that water is good for plants, so what harm would some extra water do? Well, it is right that water is needed for the proper growth of your plants. However, excess of anything is bad. This is true for water as well.

Excessive water can lead to root rotting and eventually kill off your plant. If left ignored for far too long, you would experience all your plants dying off one by one with nothing left for you to admire. To avoid this from happening during the lockdown, it is important that you start taking note of such issues.

Water Conservation: A Necessary Element to Consider During Irrigation Review

One thing that is sure with usable water is the fact that global warming and environmental issues have decreased the overall availability. Water conservation is the need for the hour. Unless you play your part in saving water, there might come a time when you might have to struggle hard to get access to water.

So, why is it so necessary to review your irrigation system?

Chances are, your garden has been experiencing leakage for a long time. While a small amount might not bother you, even a small amount of water loss can accumulate over time. Not only would you experience drastic loss of water, but it can also lead to the abrupt death of some of your plants or even damage your pathways that lead to the garden.

Change is the Key to Long-Term Savings

In case your irrigation system is outdated and doesn’t support your complete garden, it is time for you to seek help from service providers for irrigation installation, Austin, TX. In conjunction with the professional service providers, you can ensure that your plants are getting the right amount of water with no wastage.

You can opt for a smart irrigation system that can be customized for your irrigation requirements. Apart from this, make sure you check that your pipes do not develop mold, mildew, or fungus. In case they make way to your water pipes, it can infect your plants and cause certain diseases or even root rot leading to the death of the plant.

Plus, your smart irrigation system will ensure that there is no wastage of water, and the water aptly reaches your plant at the right time. Imagine you are out of the city for a long time. Who would water or at least switch on the button for your irrigation system?

With smart systems, you can program the pipes to water at a given time on a daily basis for a set time frame. This will avoid any wastage of water and keep your garden lusciously green while you are out on vacation or attending a meeting.

Read: What Is Irrigation? And How Can I Have a Lawn of My Dreams

Conclusion

So, why wait? Now is the time for you to start working on your garden and make sure that the irrigation system in place is optimum for the plants to thrive. You can also opt for zoning in case there isn’t one for your garden. This helps add water only when necessary. Most plants vary from one another as per water requirements. While some plants need water on a daily basis, others flourish well if the water supply is once every three days or so. If your garden is comprised of such plants, it is essential that you opt for irrigation installation, Austin, TX, with a zoning option.

Looking for reliable irrigation installation, Austin, TX, during a lockdown? At Hunter Irrigation Services, we ensure that all your irrigational requirements are adhered to in a professional manner. We also keep in mind the need for sanitization during the dispatch of our services. All our employees are provided proper gear to ensure there is no contamination. Further, we opt for a temperature check on a regular basis to ensure that no one in the staff is infected. For us, your health is of topmost priority. This is why we ensure regular use of sanitizers to avoid contamination. For more information on our services, you can give us a quick call at 512-690-3113 or mail us at aubreyhunter@aol.com.

Although landscaping of an area is to enhance its aesthetics while preserving the soil and improving the quality of air surrounding the location, sometimes the use of water gets compromised. And in a situation where 33% of the world’s population is suffering from a water crisis, we cannot afford to lose it for the purpose of irrigation just in order for the landscape project. In this article, we are going to highlight the importance of smart irrigation and how you can improve your irrigation strategies to conserve water with the help of irrigation installation Austin TX.

Did you know that 70% of the total volume of water withdrawal is used for the purpose of irrigation? And that is where the wastage of water happens. That is because 60% of the water that is meant to be used for the irrigational purpose is lost due to land runoff or evapotranspiration, or only due to primitive modes of irrigation. This, in turn, casts light on the need for smart irrigation technology that can go a long way in managing the rising stress on water levels.

Read on this article to know more about the topic and understand why you should inculcate smart irrigation methods in your home lawns to contribute towards saving water.

The automated irrigation system is needed:

Smart irrigation is considered to be the critical component of precision landscape formation. It helps the landscape owners as well as the contractors setting up the project to minimize the wastage of water and thus improve the quality of plantation in the area by:

• Irrigating the land at the right hour
• Preventing runoffs and other forms of water wastage
• Determining the level of moisture retained in the soil, which will further help you to find the correct irrigation strategy

Replacing the manually managed irrigation systems with the automated irrigation installation Austin TX bids riddance to the elements affected due to human error –in the essence of forgetting to close the valve after the field has been adequate water. Also, the automated method is instrumental as it helps in saving time, energy, and resources as well. The installation of smart irrigation system is relatively easy too –which doesn’t affect the lives of the average users.

The different types of smart irrigation systems:

There are two basic types of controls for smart irrigation systems. One is a weather-based irrigation system, while the other is soil-based. Both the systems vary in use and technical method of sensing and supplying the information for the irrigation system to work.

1-Weather-based irrigation system:

The weather-based smart irrigation system will make use of the local weather information from historical data, sensors, or reliable weather forecasting sources to make an informed decision about scheduling the watering times for the lawn.

A weather-based irrigation system is often termed as an evapotranspiration or ET system, which refers to the loss of water through the process of evaporation from the earth, and transpiration occurs from the greens. The water schedules are further determined by using an analytical assessment of the combination of humidity, insulation, wind, and temperature.

2-Soil-based irrigation system:

The irrigation system that is based on the profiles of the type of soil in the land makes use of information like the capacity of moisture retention of the local soil from the ground sensors to support information-based decisions to be taken about the watering schedules. The users can further configure the systems to manage the irrigation schedule on demand.

When you opt for irrigation installation Austin TX, you can schedule the timings of watering, depending upon the demand of the soil. For instance, if a particular area of the land is too dry, you can schedule to start the irrigation system of that area without affecting any other parts of the land. You can also decide to stop the system when the saturation level has been attained, and the soil now contains the desired amount of water required for the growth of the plants.

What is the advantage of using a smart irrigation system?

One of the most significant benefits of using a clever water irrigation system use that precision watering is the key technology that is kept in mind while the entire system is established. It further deals with the efficiencies of water delivery and makes sure to keep the wastage of water to a minimal level. There are generally four different types of water irrigation systems based on the types of water delivery:

• Surface irrigation system: It is the most primitive method of irrigation, and it enables the distribution of water through irrigation systems such as ditches in which we have to depend on gravity to do the work.
• Water sprinklers: In the sprinkler system –water is distributed through the air just as that of rain, which can be fixed in a location or could be mobile as well.
• Trickle irrigation systems: The trickle system delivers water very locally to the surface of the ground.
• Subsurface method: In this method, the irrigation system is buried next to the root zone of the plants, and water is directly applied from beneath the ground.

The subsurface method and trickle irrigation system make use of the lowest amount of water for watering the entire landscape, and they have the ability to save a maximum amount of water without wasting much.

The smart irrigation installation Austin TX is designed in a way keeping in mind the essentiality of water and why it needs to be preserved at any cost. The efficient use of water will not only help you save the water of your community but also you can contribute to the whole world, which heavily relies on fresh and clean water for survival.

Bottom Line:

Although we address the fact that turning barren land into a landscape could be the most efficient way of soil conservation and saving the environment from being polluted, we cannot ignore the fact that a significant amount of water is used for irrigating these landscapes. And the world that is continuously facing water scarcity –we cannot deprive it of more for the mere purpose of watering the greens.

However, what we can do is adopt other alternatives that will provide sufficient water for the irrigation of the land while checking on the wastage of the resources. Therefore, adopting the habit of using smart irrigation installation Austin TX is one such way to save our environment without further depriving it of any necessary forms of resources.

Are you looking for the smart irrigation installation Austin TX service providers in your locality? Then you have landed in the correct place. At Hunter Sprinklers, we aim to keep Austin TX wet and green. We will offer you with efficient irrigation systems that will help you conserve water without affecting the water balance of nature. To know more about us and to be a part of the green and clean environment call us at 512-690-3113 or you can also drop us an email at aubreyhunter@aol.com